Rebar straightener and cutter is highly automatic, with fast traction speed and long working life. Bars straightened by it are with little strength loss, good straightness and no scratch. As an experience manufacturer in China, our CNC straightener for 14mm steel wire shares large national and international markets, due to its numerous features, such as easy operation, simple adjustment, outstanding blanking and high performance, etc.
Application:
Rebar straightener and cutter is designed to straighten and cut the architectural III cold rolling rebar, cold-rolled plain bar and hot rolling coiled round bar.
Features:
1. It adopts one-way hydraulic system, which ensures stable operation and low noise.
2. CNC straightener for 14mm steel wire is with high efficiency and fast straightening speed, due to its high power motor.
3. It has accurate cutting length and little material loss, and cutting error is reduced from ±2cm into ±1cm.
Specification:
Capacity
|
Steel Rod
|
Φ6-14mm
|
|
Rebar
|
Φ6-12mm
|
Cutting Length
|
400mm to up
|
Cutting Error
|
±0.5cm
|
Speed
|
48-55m/min
|
Straighten & Traction Motor
|
11KW
|
Pump Motor
|
5.5KW
|
Voltage
|
380V/3phase
|
Straightening Degree
|
±2mm/m
|
Whole Weight
|
1200KG
|
Dimension(L×W×H)(mm)
|
2940×800×1100
|
Motor Optional
|
220V/415V/440V
50HZ/60HZ
|
Related Equipments/Accessories for Rebar Straightener and Cutter GT6-14A, GT4-12
It is composed of traction straightening part, hydraumatic cutting part, blanking shelf and electric control part.
Straightening part:
Depending on stagger straightening wheels and rotation of straightening box, straightening box removes stress and pushes wires to operate. It adjusts wires’ straightness by taking advantage of the forward and backward of straightening wheel.
Traction part:
It is made up of drive assembly, traction assembly and reducer. It uses electric motor as power. Triangle belt drives the reducer; reducer drives the traction assembly, traction wheel and chains; and chains drive the traction wheels of drive assembly. In this way, material feeding completes.
Cutting part:
1. Electric motor drives hydraulic pump, which is controlled by magnetic exchange valve and security pressure control valve. Active square cutters equipped on the piston rod cross with the fixed circular cutters equipped on the cylinder base. In this way, steel wires get cut.
2. Stress removes and cart is pulled back by spring, and then moves into cutting preparation status. The cutting part includes electric motor, gear pump, magnetic exchange valve, manifold block, active cart, oil cylinder, balanced guide rail, high pressure oil pipe and fuel tank.
Blanking shelf (manual)
Straightened wires enter blanking shelf through circular cutter of the active cart, and move forward to the given size, and push the travel switch, and then cut the rebar.
Electric control part:
It can be divided into two types: common type ( travel switch manual sizing) and CNC (encoder auto counter).
Title: Accessories for 12,14mm Rebar Straightener and Cutter
Description: Accessories for 14mm rebar straightener and cutter is composed of traction straightening part, hydraumatic cutting part, blanking shelf and electric control part.